Some Tips for Debugging a Home Theater System

After you spend a great deal of time setting up a home theater system, chances are that something is not right. If you haven’t hired an installer then it is up to you to figure out what the problem is. I suggest reading the next few paragraphs because I have some good advice for narrowing down the problem.

First of all, find out whether you have no video or no audio. If you do have audio but no video then double check that your video sources on. The most common cause for having no video is incorrect wiring to your TV or incorrect settings on your TV because a source usually will output both video and audio. So if you do have audio then most likely you source has no problem. Crawl behind your TV and double check that you have connected the video cable to the right input on your TV. Make note …